Metal Roofing Installation
Metal panels installed over a properly prepared deck for homes, shops and commercial buildings.
Learn moreRoofing Materials
Metal Roof Repair in Pierce City, MO
Loose fasteners, open seams and flashing leaks on metal roofs, fixed without replacing the whole roof.
36 years in the roofing trade
Metal Roof Repair for Leaks and Loose Panels
Metal roofs are tough, but they are not maintenance-free. The panels themselves rarely fail; the parts that hold them to the building do. Fasteners work loose, rubber washers dry out in the sun, seams open at the laps and flashing at chimneys, walls and roof curbs separates as the metal expands and contracts through the seasons.
Because metal roofs are common on farm buildings, shops and commercial buildings around Pierce City, a lot of those roofs have been up for years and are due for attention. A leaking barn roof may only need a few dozen fasteners replaced and one seam resealed, not a new roof.
Finding the actual leak is the work. Water on a metal roof can travel along the underside of a panel and drip somewhere far from the entry point, so we trace it back to the real opening and fix that, instead of smearing sealant across the roof.
Signs your metal roof needs repair
- Drips or stains under a metal roof, especially near seams or walls
- Screws that are visibly backing out or have cracked or missing washers
- Panels that are lifting, rattling or flapping in the wind
- Rust spots or scratches in the coating, particularly where panels overlap
- Gaps or cracked sealant at the flashing around vents, chimneys or walls
- Dents or damage from hail, a fallen limb or foot traffic
How we repair a metal roof
Trace the leak
We inspect the roof surface, fasteners, laps and flashing, and the underside of the panels if we can reach them, to find where the water enters.
Explain the problem
You hear what failed, why and whether the rest of the roof shows the same wear.
Replace failed parts
Loose or failed fasteners are replaced with the correct type and washer, and damaged panels or trim are swapped out.
Re-seal and re-flash
Open seams, laps and flashing joints are cleaned and sealed with products made for metal roofs.
Check the whole roof
We look over the rest of the roof for similar weak spots, so you know what to expect.
What affects the cost of a metal roof repair
A metal roof repair can be quick or involved, and the price depends on:
- How many fasteners, seams or flashing areas are affected
- Whether panels or trim pieces need to be replaced
- The panel type and whether matching parts are available
- Roof height, pitch and the access needed to work safely
- Rust or corrosion that needs treatment
- Whether temporary protection is needed in bad weather
Why choose Elite for metal roof repair
Fixing a metal roof is different from fixing shingles, and a roofer who works with both knows the difference. Otto’s 36 years in roofing include metal, and he would rather save you a roof than sell you one.
If the roof is beyond repair, we will say so and explain what we see. If it is not, you get a targeted fix at a fraction of the cost of replacement.
We repair metal roofs in Pierce City and the surrounding region. See our Pierce City roofing page and Joplin roofing page.
Metal Roof Repair FAQs
Why is my metal roof leaking when metal does not rot?
Because leaks rarely come from the panel itself. They come from the pieces that hold the roof together: fasteners that have backed out, worn washers, open or unsealed seams and laps, and flashing at walls, vents and curbs.
Can I just add sealant over the leak?
Sealant can slow a small leak for a while, but it is a temporary fix on its own. Metal expands and contracts with the heat, which cracks sealant over time. A lasting repair replaces the failed fastener or flashing and seals it correctly.
Why are the screws on my metal roof backing out?
Metal moves with temperature changes, and over years that movement can loosen exposed fasteners, especially if the wood under them has dried or the screw was not set right. Replacing them with the correct fastener and washer fixes the problem.
Can rusted or damaged metal panels be repaired?
Surface rust on a small area can often be treated, and a dented or damaged panel can be replaced. Widespread rust or corrosion across the roof is a sign that replacement may be the better choice, and we will tell you which one you have.
Do you repair metal roofs that someone else installed?
Yes. We repair metal roofs on houses, shops, barns and commercial buildings, whoever put them up.
Related Services
Roof Repair
Leaks, lifted shingles and flashing problems fixed at the source, not just patched over.
Learn more
Hail and Wind Damage Repair
Hail bruising and wind-lifted shingles found and repaired before they turn into leaks.
Learn moreGet a Free Quote on Metal Roof Repair
Describe the leak or damage, or send photos, and we will follow up with a free quote.